Compression and flexural testing machine High Performance with dual testing chamber and two independent measuring ranges 300 kN AND 15 kN with load cells, Servo-plus progress control unit.

This testing machine is equipped with two load chambers with two independent measuring ranges. It is suitable to perform:

1. Flexural tests on cement prisms 40.1x40x160 mm (with the range 0-15 kN)
2. Compression tests on portions of prism 40.1x40x160 mm broken in flexure, cubes side 40, 50, 70, 100 mm 2”, cores with max. height of 180 mm (with the range 0 - 300 kN) by using the suitable compression devices (accessories E170 - E172-01).

The applied load is measured by two strain gage load cells (15kN and 300kN) at high accuracy. This solution eliminates the weights of the piston and lower compression platen, packing set frictions etc., granting very high accuracy (max. error within +/- 0,5%).

Equipped with an electric microswitch to stop the piston after the specimen breakage, in order to avoid damage to the compression or flexure device.

Note: Range 0-15 kN can be increased on request up to 25 kN.

一、产品简介：

E183N全自动水泥抗压抗折一体机用于测试水泥和砂浆等建筑材料的抗压强度、抗折强度。

抗折试验适合的试件尺寸：40*40*160mm

抗压试验适合的试件尺寸：边长40mm, 50mm,70mm, 100mm, 2英寸的立方体试块；抗折破碎后的棱柱体；高度小于180mm的芯样。

量程：抗压， 最大到300KN; 抗折，标配是15KN, 可以定做到25KN。

二、产品特点：

1、试样破碎后，活塞自动停止，以防止破坏夹具；

2、机器精度1级，带安全罩；

3、平板间的最大垂直压头运动行程开档：189mm

4、柱子间的水平压头运动行程开档：210mm

5、平板直径：165mm

6、滑块行程：约35mm

产品总体尺寸：1300*400*1500mm高, 重量：约400kg